Showing all 16 results
1000 Series aluminum sheet, also known as pure aluminum sheet, is represented by grades 1050, 1060, 1070, and 1100. Among all aluminum sheet series, 1000 Series aluminum sheet stands out for its high aluminum content, with purity reaching over 99.00%.
2000 Series aluminum sheet uses copper as the primary alloying element. The copper content can be adjusted depending on the specific application, typically ranging from 2% to 5%. Examples include 2024, 2A16 (LY16), and 2A02 (LY6). 2000 Series aluminum sheet has a much higher hardness than other grades and is commonly used in aerospace, hence its name, aviation aluminum.
3000 Series Aluminum Sheet, primarily 3003, 3003, and 3A21, is also known as rust-proof aluminum sheet. Manganese is the primary element in 3000 Series Aluminum Sheet, with a manganese content ranging from 1.0 to 1.5. 3000 Series Aluminum Sheet offers superior rust resistance. It is commonly used in humid environments such as air conditioners, refrigerators, and undercarriages. While priced higher than the 1000 Series Aluminum Sheet, it is a relatively common alloy. my country boasts superior production technology for 3000 Series Aluminum Sheet.
5000 Series Aluminum Sheet, represented by 5052, 5005, 5083, and 5A05, uses magnesium as the primary alloying element, with a magnesium content controlled between 3-5%. Therefore, it is also known as aluminum-magnesium alloy. It is widely used in aviation, construction, shipbuilding, and other fields.
5052 aluminum plate is an AL-Mg alloy aluminum plate. Magnesium is the main alloying element in 5052 aluminum plate, and it is the most widely used type of rust-resistant aluminum.
5052 aluminum plate alloy has high strength, especially fatigue strength; high plasticity and corrosion resistance; it cannot be strengthened by heat treatment; it has good plasticity in semi-cold work hardening, but low plasticity in cold work hardening; good corrosion resistance; good weldability; poor machinability; and can be polished.
5083 aluminum plate is an Al-Mg alloy with a wide range of applications, particularly in the construction industry. It exhibits good corrosion resistance, weldability, and cold workability, and possesses moderate strength. The main alloying element is magnesium, making it suitable for manufacturing aircraft fuel tanks, fuel lines, vehicle and ship sheet metal parts, instruments, streetlight brackets, rivets, hardware products, and electrical appliance housings.
6000 Series aluminum sheet, represented by 6061, combines the advantages of the 4000 and 5000 series, incorporating both magnesium and silicon.
6000 Series aluminum sheet is an aluminum alloy composed primarily of Mg and Si, with a Mg2Si phase as a strengthening phase. It is a heat-treatable aluminum alloy.
6061 aluminum plate is a sheet material made from 6061 aluminum alloy (Al-Mg-Si forged aluminum alloy).
The main component of 6061 aluminum plate is aluminum (approximately 95%), containing two main alloying elements: silicon (0.4%-0.8%) and magnesium (0.8%-1.2%). It also contains auxiliary elements such as copper (0.15%-0.4%), chromium (0.04%-0.35%), zinc (0.25%), and manganese (0.15%).
6063 aluminum sheet is a rectangular sheet produced by rolling aluminum ingots. Belonging to the Al-Mg-Si system, it is a medium-low alloy with high ductility, and is a primary material for building door, window, and curtain wall frames. 6063 aluminum sheet possesses moderate strength, and after heat treatment, exhibits high impact toughness and excellent thermoplasticity, enabling high-speed extrusion forming of complex thin-walled profiles.
7000 Series Aluminum Sheet is an ultra-hard aluminum alloy with zinc, magnesium, and copper as primary alloying elements. It boasts high strength, hardness, and corrosion resistance, making it widely used in aerospace, military, automotive, and other fields.
ALMG3 5754 Aluminum Plate is a typical representative of Al-Mg alloy aluminum sheets, with magnesium (2.6%–3.6%) and silicon (≤0.4%) as the main alloying elements. It possesses moderate strength, good corrosion resistance, and weldability.
ALMG3 5754 Aluminum Plate is available in various specifications with thicknesses ranging from 0.15–600 mm and widths from 20–2650 mm. It is suitable for manufacturing automotive doors, molds, ship structures, and transport tanks, and is widely used in high-speed rail sound barriers, can manufacturing, and pressure vessel applications.
Aluminum Circle Discs are round aluminum sheets made of aluminum alloys (commonly 1-series, 3-series, 5-series, 6-series, etc.). They are lightweight (approximately 2.71 g/cm³), corrosion-resistant, have good electrical and thermal conductivity, and excellent formability and ductility. Suitable for deep processing such as stamping, stretching, and spinning, they are commonly used in kitchenware manufacturing, electronic heat dissipation, packaging containers, traffic signs, and industrial stamping parts.
We can customize aluminum sheet plate for special applications according to customer requirements, with sizes as small as 120 x 120 mm and thicknesses as thin as 0.6 mm.
Dimensions
Thickness: 0.6-3.2 mm
Width: 120-800 mm
Length: 120-4000 mm
Main grades of aluminum sheet plate:
1050, 3003, 3105, 3004, 5005, 5052, 5083, 5754, 6061, 7075
Temperatures:
O, H12, H14, H16, H18, H22, H24, H26, H28, H32, H34, T4, T6
Anodized aluminum plate is an industrial material formed by electrolytic treatment of aluminum or aluminum alloy plates as the substrate in electrolytes such as sulfuric acid and chromic acid, using the latter as the anode.
The alumina film formed on the surface of the anodized aluminum plate consists of a porous outer layer and a dense barrier layer. The thickness of a typical oxide film is 5-20 micrometers, while a hard film can reach 60-200 micrometers.
Anti-slip aluminum plate is an industrial sheet material made from aluminum ingots through rolling. The surface is formed with a five-rib, pointer-pattern, and other anti-slip textures through a rolling process. The 60-80 degree angle of the pattern increases the coefficient of friction.
Anti-slip aluminum plate uses rust-resistant aluminum alloys such as 5052 and 6061, conforming to GB/T 3618-2006 standards. It is suitable for highly corrosive environments such as vehicle flooring, ship decks, and cold storage platforms.
Checkered aluminum plate, also known as embossed aluminum plate or textured aluminum alloy plate, is a type of metal material with a textured surface.
Checkered aluminum plate is mainly used in packaging, building curtain walls, cabinet shells, vehicle flooring, shipbuilding, and anti-slip applications, extending to home appliance decoration, electronic product housings, and other fields. Its applications also include lighting fixtures, solar reflectors, aerospace, cold storage flooring, and automotive foot pedals.