PRODUCTS

Showing 81–100 of 280 results

API 5L X70 Steel Pipe

API 5L X70 Steel Pipe is a type of API 5L line pipe. API 5L is a standard for line pipe developed by the American Petroleum Institute (APIPI) to specify the manufacturing, inspection, and use requirements for line tube. The API 5L standard covers various grades of line pipe. For API 5L X70 L485 seamless steel pipe, its implementation standard specifies performance indicators such as a yield strength of 485 MPa, a tensile strength of 620-770 MPa, an elongation of no less than 21%, and impact toughness. Furthermore, the standard requires non-destructive testing (NDT) such as ultrasonic testing and radiographic testing to ensure quality and safety.

Read more
ASTM A1008 Steel Sheet

ASTM A1008 Steel Sheet is a general specification for cold-rolled carbon steel and high-strength low-alloy steel (HSLA) in the United States. Common types include CS (structural steel), DDS (deep-drawing steel), EDDS (ultra-deep-drawing steel), and HSLAS (high-strength low-alloy steel).

ASTM A1008 Steel Sheet is not a single grade; it requires specific analysis in conjunction with the type (e.g., CS Type B, DDS) and strength grade (e.g., Grade 45/50).

Read more
ASTM A106 Seamless Steel Tube

ASTM A106 Seamless Steel Tube is a seamless steel tube that complies with the American ASTM A106/ASME SA106 standard. ASTM A106 Seamless Steel Tube is available in three grades: A106 Grade A Seamless Steel Tube, A106 Grade B (Gr.B) Seamless Steel Tube, and A106 Grade C Seamless Steel Tube. A106 Grade A Seamless Steel Tube is preferred for cold roll forming.

Read more
ASTM A179 Seamless Steel Tube

ASTM A179 Seamless Steel Tube is a seamless cold-drawn low-carbon steel tube for ASTM A179/ASME SA179 heat exchangers and condensers. It is a seamless steel tube for specific purposes. ASTM A179 Seamless Tube has a small wall thickness and is particularly suitable for tubular heat exchangers, condensers and similar heat transfer equipment.

Read more
ASTM A192 Boiler Tube

ASTM A192 Boiler Tube is a seamless carbon steel boiler tube for ASTM A192/ASME SA192 high-pressure equipment. ASTM A192 Boiler Tubes are mainly used in high-pressure equipment such as high-pressure boilers and superheaters to transport high-temperature and high-pressure steam or hot water. They play an important role in high-pressure steam systems in the power, petrochemical and other industries, and are one of the key components to ensure the energy conversion and transmission efficiency in the production process of these industries.

Read more
ASTM A210 Boiler Tube

ASTM A210 Boiler Tube is a seamless medium carbon steel tube for ASTM A210/ASME SA210 boilers and superheaters. ASTM A210/ASME SA210 standard applies to seamless medium carbon steel tubes for boilers and superheaters. ASTM A210 Boiler Tubes include seamless steel tubes with small wall thickness for boiler tubes, boiler flue tubes, safety ends, domes and support tubes, and superheater tubes. The production methods of steel tubes under ASTM A210/ASME SA210 standards include hot rolling, cold drawing and hot expansion. The delivery state is usually hot rolled or heat treated. These production methods ensure the quality and performance stability of the steel tubes during the manufacturing process.

Read more
ASTM A213 Boiler Tube

ASTM A213 Boiler Tube is a special steel pipe for high-temperature and high-pressure steam pipelines, also known as boiler tubes. It is usually made of carbon steel or alloy steel, with excellent high temperature resistance, corrosion resistance and pressure resistance, and is widely used in petroleum, chemical, electric power, construction and other fields.

Read more
ASTM A283 Grade C Steel Plate

ASTM A283 Grade C Steel Plate is a carbon structural steel under the American standard ASTM A283/A283M, covering four grades: A, B, C, and D. Among them, ASTM A283 Grade C Steel Plate is the most widely used type in industrial applications due to its excellent overall performance. ASTM A283 Grade C Steel Plate is known for its medium-to-low strength, high cost-effectiveness, and good machinability, and is widely used in industries such as construction, machinery, energy, and shipbuilding.

Read more
ASTM A335 P22 Alloy Steel Pipe

ASTM A335 P22 Alloy Steel Pipe is a high-pressure alloy pipe, also known as 10CrMo910 steel pipe, which is a special steel pipe used in high temperature and high pressure environments. It has good thermal strength and oxidation resistance and is widely used in petrochemical, electric power, aerospace and other industrial fields.

Read more
ASTM A335 P5 Alloy Steel Pipe

ASTM A335 P5 Alloy Steel Pipe is mainly composed of alloy elements and high-quality carbon steel, alloy structural steel or stainless heat-resistant steel. These alloy elements play a key role in the steel pipe manufacturing process and can significantly improve the mechanical properties and heat resistance of the steel pipe. The domestic material corresponding to ASTM A335 P5 Alloy Steel Pipe is usually 1Cr5Mo or Cr5Mo, which has good oxidation resistance, corrosion resistance and organizational stability, and high thermal strength.

Read more
ASTM A335 P9 Alloy Steel Pipe

ASME SA335/ASTM A335 P9 Alloy Steel Pipe is a ferritic alloy seamless steel pipe for high temperature conditions. The main manufacturing purpose of ASTM A335 P9 Alloy Steel Pipe is to serve high temperature, high pressure and ultra-high pressure boilers. It is widely used to manufacture key components such as superheater tubes, reheater tubes, gas guide tubes and main steam pipes. In the petrochemical industry, the manufacture of high temperature boilers, superheaters, heat exchangers and pipe fittings is also inseparable from ASTM A335 P9 high temperature alloy pipes. It can maintain stable physical and chemical properties under high temperature environment to ensure the safe and efficient operation of related equipment.

Read more
ASTM A335 P91 Alloy Steel Pipe

A335 P91 Alloy Steel Pipe is equivalent to the national standard 10Cr9Mo1VNb. T91/P91 (10Cr9Mo1VNb). A335 P91 Seamless Steel Pipe not only has high oxidation resistance and high temperature steam corrosion resistance, but also has good impact toughness and high and stable long-lasting plasticity and thermal strength. When the use temperature is lower than 620℃, its allowable stress is higher than that of austenitic stainless steel. Above 550℃, the recommended design allowable stress is about twice that of T9 and 2.25Cr-1Mo steel.

Read more
ASTM A36 A992 A572 C Channel Steel

ASTM A36 A992 A572 C Channel Steel is a high-strength steel suitable for general structural engineering. Manufactured according to ASTM standards, it offers excellent tensile strength and corrosion resistance. We offer a wide range of profile steels in various standards and specifications at competitive prices. We welcome your inquiries or requests for purchase.

Read more
ASTM A36 A992 A572 MC Channel Steel

ASTM A36 A992 A572 MC Channel Steel is channel steels manufactured in accordance with ASTM standards. ASTM channel steels are categorized into various types based on size and construction, such as C-channel steel, MC-channel steel, and U-channel steel.

Read more
ASTM A36‌ Angle Steel Bar

ASTM A36 Angle Steel Bar is a type of low-carbon structural steel angle produced in accordance with the ASTM A36/A36M standard. It features a yield strength of at least 250 MPa and is available in both Steel Equal Angle and Unequal Angle Steel Bar; it is widely used in construction, bridges, and general steel structures.

Read more
ASTM A36 Steel Plate

ASTM A36 Steel Plate is a US ASTM standard (ASTM A36/A36M) and is a standard carbon steel plate, equivalent to Q235 hot-rolled steel plate in China.
ASTM A36 Steel Plate is widely used in construction, bridges, machinery manufacturing, shipbuilding, agricultural machinery, mining equipment, automotive structural parts, and other fields. It is particularly suitable for manufacturing welded and bolted metal structures for industrial and civil construction, as well as products and parts for general construction and mechanical engineering applications.

Read more
ASTM A516 Pressure Vessel Steel Plate

ASTM A516 Pressure Vessel Steel Plate conforms to the ASTM/ASME (American Society for Testing and Materials) standard. This standard is primarily used for welded pressure vessel steel plates where improved notch toughness is crucial. It is classified into four strength grades: A516Gr55, A516Gr60, A516Gr65, and A516Gr70.

Read more
ASTM A519 4130 Honed Steel Tubing For Hydraulic Cylinder

ASTM A519 4130 Honed Steel Tubing for Hydraulic Cylinders is a seamless American standard steel tube made from 4130 alloy steel through cold drawing or cold rolling. It features high dimensional precision and a superior surface finish, making it suitable for precision components in mechanical structures, hydraulic equipment, and other applications.
1. Standard: ASTM A519
2. Materials: 4130
3. Technical: Cold-drawn seamless
4. Technology: Honed & SRB (Skived and Roller Burnished).
5. Application: Used in hydraulic cylinders for heavy machinery, cranes, excavators, and forklifts.
6. OD: 4-260mm WT: 5-25mm

Read more
ASTM A519 GR.4130 Seamless Alloy Steel Tube

ASTM A519 GR.4130 Seamless Alloy Steel Tube is a seamless chromium-molybdenum alloy structural steel tube specified in the ASTM standard “Seamless Carbon and Alloy Steel Tubes for Machine Use” (A519/A519M). “4130” is the SAE/AISI steel grade (UNS G41300), specifically designed for manufacturing mechanical parts subjected to high stress and requiring good comprehensive mechanical properties.

Read more
ASTM A519 GR.4140 Seamless Alloy Steel Tube

ASTM A519 GR.4140 Seamless Alloy Steel Tube is an American standard medium-carbon chromium-molybdenum alloy seamless steel tube, corresponding to the domestic grade 42CrMo. It possesses high strength, high hardenability, and good toughness. This material is commonly used to manufacture high-load-bearing mechanical parts, such as drive shafts, gears, and oil drilling tools.

Read more