PRODUCTS

Showing 181–200 of 280 results

Honed Steel Tube

Our factory produces and sells various specifications and models of honed steel tube, including precision honed steel tubing, Hydraulic Cylinder Steel Pipe, Hydraulic Honing Steel Pipe, large-diameter honed steel tubes, and small-diameter honed steel pipe.
Our factory has six honed steel tube production lines capable of processing 12-1100mm honed steel tube (for model aircraft and cylinder tubes). The honed steel tubes (for model aircraft and cylinder tubes) produced by our factory typically achieve a roughness of Ra ≤ 0.08μm, correct roundness, and ovality ≤ 0.01mm. This improves surface hardness, eliminates stress-induced deformation, and increases hardness to HV ≥ 4°. A residual stress layer is formed after processing, increasing fatigue strength by 30%, improving fit quality, reducing wear, and extending component life.

Read more
Hot Dip Galvanized Steel Coil

Hot dip galvanized steel coil is a common metallic material, produced by hot-dip galvanizing ordinary carbon steel coils. Hot-dip galvanizing is a process that involves immersing a steel coil in molten zinc, coating its surface with a protective layer of zinc. This treatment effectively improves the steel’s corrosion resistance, extends its service life, and significantly improves its appearance and processing performance.

Read more
Hot Rolled Bulb Flat Bar

Hot rolled bulb flat bar is a special type of steel, consisting of a flat web and a spherical head, resulting in an asymmetrical shape. It is widely used in shipbuilding and bridge construction. The domestic standard for hot rolled bulb flat bar is GB/T9945-2001, “Hot Rolled Bulb Flat Bar,” which is consistent with the European standard EN10067:1996, “Hot Rolled Bulb Flat Bar,” differing only in tolerances and material specifications.

Read more
Hot Rolled NO.1 Finish Stainless Steel Sheet

Hot Rolled NO.1 Finish Stainless Steel Sheet refers to stainless steel sheets produced through hot rolling, followed by annealing and pickling. The “No.1” designation is a Japanese Industrial Standard (JIS) designation for hot-rolled, pickled surfaces, not a grade, but rather a surface finish.

Read more
Hot Rolled Steel Coil

Hot rolled steel coil (HRC), that is, hot-rolled steel coil, uses slabs (mainly continuous cast slabs) as raw materials, and is heated and made into strips through rough rolling units and finishing rolling units. The hot steel strip coming out of the last rolling mill of finishing rolling is cooled to the set temperature by laminar flow, and is rolled into a steel strip coil by the coiler. The cooled steel strip is coiled.

Read more
Hot Rolled Steel Plate

Hot Rolled Steel Plate, commonly known as hot rolled plates, refer to steel plates with a width greater than or equal to 600mm and a thickness of 0.35-200mm and a thickness of 1.2-25mm, or even more. Hot Rolled Steel Plates have good plasticity, good toughness and ductility, and are generally medium-thick plates.

Hot Rolled Steel Plate is a widely used steel with high strength and good toughness, which is used in many fields. We can provide various specifications of hot-rolled steel plates, carbon steel plates and cold-rolled steel plates, .etc. We are here to serve you.

Read more
Hot Rolled Steel Round Bar

Hot rolled steel round bars are solid, long steel bars with a circular cross-section, formed by high-temperature rolling of steel billets. They are characterized by good hardenability, high hardness, and excellent wear resistance, but their dimensional accuracy and surface finish are lower than those of cold-drawn round bars.

Read more
Hot Rolled Steel Sheet Pile

Hot Rolled Steel Sheet Pile (HSP) is a type of steel structural member formed through a high-temperature rolling process, featuring interlocking edges. It can be interlocked to form continuous retaining/water-retaining walls. Main types include U-shaped, Z-shaped, and straight-web type (often called “straight type”).

Read more
Hot-dip Galvanized Steel Wire

Hot-dip galvanized steel wire s a type of galvanized steel wire. Hot-dip galvanized steel wire is made from high-quality medium-carbon or high-carbon steel. It undergoes pickling, phosphating, and wire drawing, followed by a hot-dip galvanizing process. The coating thickness ranges from 45 to 300 microns. The zinc layer offers strong adhesion and long-lasting corrosion resistance, maintaining its rust-proof properties for decades in outdoor environments.

Read more
Hydraulic Cylinder Steel Pipe

Hydraulic cylinder steel pipe, also known as honing pipe, is a core component for transmitting high-pressure fluids in hydraulic systems. It is a cold-drawn or cold-rolled precision seamless steel pipe. Hydraulic cylinder steel pipe is primarily made of carbon steel (such as ST35 and ST45), alloy steel, and 304L stainless steel. It is widely used in hydraulic cylinders, pneumatic cylinders, construction machinery, and automotive precision components.

Read more
Hydraulic Honing Steel Pipe

Hydraulic Honing Steel Pipe is a precision pipe manufactured through a honing process. Its interior surface undergoes a special treatment, resulting in exceptionally high smoothness and dimensional accuracy. Honing is a combined grinding and polishing process that effectively removes microscopic irregularities on the pipe’s interior surface, resulting in a mirror-like finish. Hydraulic Honing Steel Pipe is typically made from high-quality alloy steel or stainless steel and undergoes multiple processing steps to meet the needs of diverse industrial applications.

Read more
I Beam Steel

I beam steel is a hot-rolled or welded steel section with an “I”-shaped cross-section. It is mainly divided into ordinary I-beams, lightweight I-beams, and wide-flange I-beams (often mistakenly called H-beams).

The core characteristics of I beam steel are its high and narrow cross-section, approximately 1:6 slope on the inner flange, strong bending resistance but weaker torsional and lateral stiffness.

Read more
Industrial Aluminum Profile

Industrial aluminum profiles, also known as industrial aluminum extrusions or industrial aluminum alloy profiles, are aluminum materials with different cross-sectional shapes obtained by hot melting and extrusion of aluminum rods. The mechanical properties and application areas vary depending on the proportion of alloys added.

Industrial aluminum profiles generally refer to all aluminum profiles except those used for building doors and windows, curtain walls, decoration, and building structures. They are widely used in transportation, photovoltaics, construction machinery, aerospace, and medical devices.

Read more
Inner Hexagonal Steel Pipe

Inner Hexagonal Steel Pipe is a seamless steel pipe with a circular outer surface and a hexagonal inner surface. It is mainly used to connect, support and fix various mechanical equipment, with high strength, rigidity and stability. Inner Hexagonal Seamless Steel Pipe has a wide range of uses, including but not limited to structural support (such as bridges, high-rise buildings and industrial facilities), automobile manufacturing (such as chassis, suspension systems and engine mounts), aerospace (such as aircraft frames and rocket engine mounts), shipbuilding, pipeline support, agricultural machinery and decoration industries, etc.

Read more
IPE240 EN Standard I Beam Steel

IPE240 EN Standard I Beam Steel belongs to the IPE series.

IPE240 EN Standard I Beam Steel is a European standard I-beam with a core specification of 240 mm height and 120 mm flange width, and a theoretical weight of approximately 30.7 kg per meter. It is widely used in building and mechanical structures.

Read more
Large Diameter Aluminum Tube

Large diameter aluminum tubes are lightweight, high-strength, have good thermal conductivity, corrosion resistance, and are highly machinable, making them widely used in construction, transportation, electronics, and industrial equipment.

Read more
LSAW Steel Pipe

LSAW steel pipe (Longitudinally Submerged Arc Welding abbreviated as LSAW) is a professional expression term for straight seam submerged arc welding steel pipe. Pipes produced by submerged arc welding and diameter expansion.

Read more
Marine Steel Plate

Marine steel plate, also known as shipbuilding steel plate, is a hot-rolled steel plate specifically designed for ship hull structures. It must conform to the specifications of classification societies (such as CCS, ABS, DNV, etc.), and its core characteristics are high strength, high toughness, good corrosion resistance, and excellent weldability.

Read more
Mild Steel Equal Angle

Mild Steel Equal Angle refers to athe angle steel with two sides of equal width. Angle steel can be formed into various load-bearing components according to different structural requirements, and can also serve as connectors between components. It is widely used in various building and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, and warehouses.

Read more
Mild Steel Flat Bar with Best Price

Mild steel flat bar is a long, rectangular steel bar. Flat bar is typically wider than thick, hence its flat shape. Mild steel flat bar can be finished, used as billet for welded pipe, or used as thin plate for sheet metal lamination. Main Applications: Mild steel flat bar, as finished product, can be used to make hoops, tools, and mechanical parts, and in construction as structural members for roof frames and escalators.

Read more